|
Author
|
Topic: corrosion protection
|
lubbockwaterman
Member Posts: 2
From:Lubbock, Texas, USA
Registered: Jun 2001
|
posted 06-25-2001 04:12 PM
   
quote:
Originally posted by Don:
Does anyone know where one could find a rust rate curve of temperature vs humidity with respect to cold roll steel or cast iron. Also I work for a compressor company and we are seeking a consultant to help our supplier base to control rust on purchased parts. We restrict the types of liquid rust inhibiotrs we allow on parts and could use an expert in rust prevention. Types of iron potection is 1010 type steel and cast iron. Does anyone a consultant who could help?
I would like to help you. First I need to have more information. If the parts are being stored in the open, that is one thing, but if they are in a "dry" environment that may mean something else. Give me more information about the use of the parts and how they are being stored before use. Perhaps I can help you.
|
Rusty 1
Member Posts: 6
From:Victoria B.C. Canada
Registered: Feb 2001
|
posted 05-17-2001 11:04 AM
I market corrosion inhibitors exclusive to me
and would be interested in your testing.Terry Laing
quote:
Originally posted by Terry:
There is realy no generic standardized inhibitor test. However, you can use the basics in ASTM G31 for immersion testing.ASTM G1.05 (Laboratory corrosion testing) is starting a new standardization activity directed at inhibitor testing. Hopefully the first meeting will be in May 1998 in Atlanta. If you are interested, I am starting a mailing list of people interested in participation. Regards, Dr. R.D. Ka
|
Edward Kollin
unregistered
|
posted 12-26-2000 11:15 AM
I am a consultant in the area of corrosion inhibition. I can be reached at 908 322-4474Lubrication Science
Scotch Plains, NJ 07076 |
Terry
unregistered
|
posted 03-05-2000 11:01 PM
There is realy no generic standardized inhibitor test. However, you can use the basics in ASTM G31 for immersion testing.ASTM G1.05 (Laboratory corrosion testing) is starting a new standardization activity directed at inhibitor testing. Hopefully the first meeting will be in May 1998 in Atlanta. If you are interested, I am starting a mailing list of people interested in participation. Regards, Dr. R.D. Ka
|
Don
unregistered
|
posted 02-24-2000 08:38 PM
Does anyone know where one could find a rust rate curve of temperature vs humidity with respect to cold roll steel or cast iron. Also I work for a compressor company and we are seeking a consultant to help our supplier base to control rust on purchased parts. We restrict the types of liquid rust inhibiotrs we allow on parts and could use an expert in rust prevention. Types of iron potection is 1010 type steel and cast iron. Does anyone a consultant who could help?
|
Corrosionsource Discussion Boards
UBBFriend: Email This Page to Someone! 
