Technical Sponsor ASTM presents 5 chapters from it's popular book.
Chapter 4 - Surface Analysis, Alfred G. Hopkins
Chapter 10 - High-Temperature and High-Pressure, Russell D. Kane
Chapter 18 - Pitting, Robert C. Kelly
Chapter 41 - Inhibitors, Erwin Buck
Chapter 70 - Electronics, Robert Baboian
Sheldon W. Dean, Jr.
Harvey P. Hack
Gardner S. Haynes
John R. Scully
Donald O. Sprowls
ASTM Manual Series: MNL 20
ASTM Publication Code Number (PCN): 28-020095-27
Printed in the U.S.A.
|
Introduction | ||
I: GENERAL INFORMATION - R. Baboian, Section Editor | ||
Unified Numbering System for Metals and Alloys Common Names of Selected UNS Alloys Standard Terminology Relating to Corrosion and Corrosion Testing Glossary of Corrosion-Related Acronyms Standard Abbreviations and Unit Symbols International System of Units (SI) Conversion Tables General Conversion Factors Condensed Metric Practice Guide for Corrosion Multiplication Factors (SI Prefixes) Corrosion Rate Conversion Factors Corrosion Rate Calculation (from Mass Loss) Reference Electrode Potentials Equivalent Weight Values for Metals and Alloys Constants Used in Faraday's Equation Physical Properties of Gases and Liquids Physical Properties of Elements Densities of Metals and Alloys |
| |
II: TESTING AND EVALUATION - R. Baboian, Section Editor | ||
Chapter 1 - Planning and Design of Tests, John W. Spence, Stephen D. Cramer, and Fred H. Haynie | 33 | |
Chapter 2 - Types of Data, David C. Silvennan | 40 | |
Chapter 3 - Metallographic Analysis, Richard L. Colwell | 45 | |
Chapter 4 - Surface Analysis, Alfred G. Hopkins | 55 | |
Chapter 5 - Statistical Treatment of Data, Data Interpretation, and Reliability, Fred H. Haynie | 62 | |
Chapter 6 - Computerization of Data,David B. Anderson | 68 | |
III: TYPES OF TF,STS - G. S. Haynes, Section Editor | ||
Laboratory Tests Chapter 7 - Electrochemical, John R. Scully | 75 | |
Chapter 8 - Cabinet, Gardner Havnes | 91 | |
Chapter 9 - Immersion, Richard A. Corbett | 98 | |
Chapter 10 - High-Temperature and High-Pressure, Russell D. Kane | 106 | |
Field Tests Chapter 11 - Atmospheric, Sheldon W. Dean, Jr. | 116 | |
Chapter 12 - Seawater, James F. Jenkins | 126 | |
Chapter 13 - Freshwater, Walter T. Young and Philippa Fairer | 131 | |
Chapter 14 - Soils, Edward E.scalante | 137 | |
Service Tests Chapter 15 - Industrial Applications, Allan Perkins | 143 | |
Chapter 16 - High-Temperature, Gaylord D. Smith | 149 | |
IV: TESTING FOR CORROSION TYPES - J. R. Scully, Section Editor | ||
Chapter 17 - Uniform James A. Ellor | 161 | |
Chapter 18 - Pitting, Robert C. Kelly | 166 | |
Chapter 19 - Crevice, Jeffery R. Kearns | 175 | |
Chapter 20 - Galvanic, Harvey P. Hack | 186 | |
Chapter 21 - Intergranular, Michael A. Streicher | 197 | |
Chapter 22 - Exfoliation, Donald O. Sprowls | 218 | |
Chapter 23 - Erosion, Cavitation, and Fretting, W. A. Glaeser | 225 | |
Chapter 24 - Dealloying, Ann Chidester Van Orden | 229 | |
Chapter 25 - Environmental Cracking - Stress Corrosion,W. Barry Lisagor | 240 | |
Chapter 26 - Environmental Cracking - Corrosion Fatigue, Richard P. Gangloff | 253 | |
Chapter 27 - Hydrogen Damage, C. G. Interrante and L. Raymond | 272 | |
V: TESTING IN ENVIRONMENTS - H. P. Hack, Section Editor | ||
Chapter 28 - Outdoor Atmospheres, Herbert H. Lawson | 289 | |
Chapter 29 - Indoor Atmospheres, J. D. Sinclair | 295 | |
Chapter 30 - Seawater, Denise Aylor | 307 | |
Chapter 31 - Freshwater, Walter T. Young and Philippa Fairer | 316 | |
Chapter 32 - Soils, Victor Chaker | 323 | |
Chapter 33 - Concrete,Meal S. Berke | 331 | |
Chapter 34 - Industrial Waters, A. S. Krisher | 338 | |
Chapter 35 - Industrial Chemical, Robert B. Puyear | 343 | |
Chapter 36 - Petroleum, K. Daniel Efird | 350 | |
Chapter 37 - High-Temperature Gases, Gay!ord D. Smith, Pasha Ganesan, Curtis S. Tassen, and Charles Conder | 359 | |
Chapter 38 - Organic Liquids, C. S. Brossia and R. G. Kellv | 372 | |
Chapter 39 - Molten Salts, F. S. Pettii | 380 | |
Chapter 40 - Liquid Metals, Chris Bagnall, Peter F. Tortorelli, Jack H. DeVan, and Steven L. Schrock | 387 | |
Chapter 41 - Inhibitors, Erwin Buck | 403 | |
Chapter 42 - In Vivo, K. J. Bundy | 411 | |
Chapter 43 - Microbiological Effects, Stephen C. Dexter | 419 | |
VI: MATERIALS TESTING - D. O. Sprowls, Section Editor | ||
Chapter 44 - Zinc, Frank E. Goodwin | 433 | |
Chapter 45 - Magnesium, James E. Hillis | 438 | |
Chapter 46 - Aluminum (and Alloys), Bernard W. Lifka | 447 | |
Chapter 47 - Steels, M. E. Komp and D. L. Jordan | 458 | |
Chapter 48 - Copper (and Alloys), Arthur Cohen | 466 | |
Chapter 49 - Nickel (and Alloys), James R. Crum | 476 | |
Chapter 50 - Stainless Steels Mark J. Johnson | 481 | |
Chapter 51 - Cobalt-Base Alloys, P. Crook | 486 | |
Chapter 52 - Titanium, Ronald W. Schutz | 493 | |
Chapter 53 - Zirconium and Hafnium, Te-Lin Yau | 507 | |
Chapter 54 - Tantalum, F. J. Hunkeler | 511 | |
Chapter 55 - Metallic Coatings, T. C. Simpson and H. E. Townsend | 513 | |
Chapter 56 - Nonmetallic Coatings, Richard D. Granata | 525 | |
Chapter 57 - Metal Matrix Composites L H. Hihara | 531 | |
Chapter 58 - Electrodeposits, T. P. Moffat | 543 | |
Chapter 59 - Powder Metals, Erhard Klar and Prasan K. Samal | 551 | |
VII: TESTING IN INDUSTRIES - S. W. Dean, Jr., Section Editor | ||
Chapter 60 - Automotive, Robert Baboian | 561 | |
Chapter 61 - Commercial Aircraft, J. A. Marceau and A. A. Adjorlolo | 574 | |
Chapter 62 - Military Aircraft and Aerospace, Earl C. Groshart | 579 | |
Chapter 63 - Pipeline, Paul S. Rothman and Walter T. Young | 582 | |
Chapter 64 - Highways, Tunnels, and Bridges, Victor Chaker | 591 | |
Chapter 65 - Marine - Piers and Docks, James F. Jenkins | 600 | |
Chapter 66 - Electric Power, P. Mayer and A. D. Pellegrini | 606 | |
Chapter 67 - Nuclear Power, George J. Licina | 611 | |
Chapter 68 - Steam Generation, Otakar Jonas | 622 | |
Chapter 69 - Flue Gas Desulfurization, Harvey S. Rosenberg | 630 | |
Chapter 70 - Electronics, Robert Baboian | 637 | |
Chapter 71 - Telecommunications, G. Schick | 645 | |
Chapter 72 - Metals Processing, Terry A. DeBold | 652 | |
Chapter 73 - Chemical Processing, Joseph J. Demo | 662 | |
Chapter 74 - Pulp and Paper David C. Crowe and D. Angela Wensley | 673 | |
Chapter 75 - Petroleum Production and Refining, Richard S. Treseder | 683 | |
Chapter 76 - Food and Beverage, W. E. Clayton | 693 | |
Chapter 77 - Water Treatments, Bennett P. Boffardi | 697 | |
Chapter 78 - Medical and Dental, Anna C. Fraker | 705 | |
Chapter 79 - Pharmaceutical, Ivy Logsdon and David F. Jensen | 716 | |
VIII: INDEX OF CORROSION STANDARDS - G. S. Haynes and H. P. Hack, Section Editors | ||
All rights reserved.