Galvanic Table

The following Galvanic Table lists metals in the order of their relative activity in seawater environment. The list begins with the more active (anodic) metal and proceeds down the to the least active (cathodic) metal of the galvanic series. A "galvanic series" applies to a particular electrolyte solution, hence for each specific solution which is expected to be encountered for actual use, a different order or series will ensue. In a galvanic couple, the metal higher in the series (or the smaller) represents the anode, and will corrode preferentially in the environment.

Listed below is the latest galvanic table from MIL-STD-889 where the materials have been numbered for discussion of characteristics. However, for any combination of dissimilar metals, the metal with the lower number will act as an anode and will corrode preferentially. The table is the galvanic series of metals in sea water from Army Missile Command Report RS-TR-67-11, "Practical Galvanic Series."

Active (Anodic)

  1. Magnesium
  2. Mg alloy AZ-31B
  3. Mg alloy HK-31A
  4. Zinc (hot-dip, die cast, or plated)
  5. Beryllium (hot pressed)
  6. Al 7072 clad on 7075
  7. Al 2014-T3
  8. Al 1160-H14
  9. Al 7079-T6
  10. Cadmium (plated)
  11. Uranium
  12. Al 218 (die cast)
  13. Al 5052-0
  14. Al 5052-H12
  15. Al 5456-0, H353
  16. Al 5052-H32
  17. Al 1100-0
  18. Al 3003-H25
  19. Al 6061-T6
  20. Al A360 (die cast)
  21. Al 7075-T6
  22. Al 6061-0
  23. Indium
  24. Al 2014-0
  25. Al 2024-T4
  26. Al 5052-H16
  27. Tin (plated)
  28. Stainless steel 430 (active)
  29. Lead
  30. Steel 1010
  31. Iron (cast)
  32. Stainless steel 410 (active)
  33. Copper (plated, cast, or wrought)
  34. Nickel (plated)
  35. Chromium (Plated)
  36. Tantalum
  37. AM350 (active)
  38. Stainless steel 310 (active)
  39. Stainless steel 301 (active)
  40. Stainless steel 304 (active)
  41. Stainless steel 430 (active)
  42. Stainless steel 410 (active)
  43. Stainless steel 17-7PH (active)
  44. Tungsten
  45. Niobium (columbium) 1% Zr
  46. Brass, Yellow, 268
  47. Uranium 8% Mo
  48. Brass, Naval, 464
  49. Yellow Brass
  50. Muntz Metal 280
  51. Brass (plated)
  52. Nickel-silver (18% Ni)
  53. Stainless steel 316L (active)
  54. Bronze 220
  55. Copper 110
  56. Red Brass
  57. Stainless steel 347 (active)
  58. Molybdenum, Commercial pure
  59. Copper-nickel 715
  60. Admiralty brass
  61. Stainless steel 202 (active)
  62. Bronze, Phosphor 534 (B-1)
  63. Monel 400
  64. Stainless steel 201 (active)
  65. Carpenter 20 (active)
  66. Stainless steel 321 (active)
  67. Stainless steel 316 (active)
  68. Stainless steel 309 (active)
  69. Stainless steel 17-7PH (passive)
  70. Silicone Bronze 655
  71. Stainless steel 304 (passive)
  72. Stainless steel 301 (passive)
  73. Stainless steel 321 (passive)
  74. Stainless steel 201 (passive)
  75. Stainless steel 286 (passive)
  76. Stainless steel 316L (passive)
  77. AM355 (active)
  78. Stainless steel 202 (passive)
  79. Carpenter 20 (passive)
  80. AM355 (passive)
  81. A286 (passive)
  82. Titanium 5A1, 2.5 Sn
  83. Titanium 13V, 11Cr, 3Al (annealed)
  84. Titanium 6Al, 4V (solution treated and aged)
  85. Titanium 6Al, 4V (anneal)
  86. Titanium 8Mn
  87. Titanium 13V, 11Cr 3Al (solution heat treated and aged)
  88. Titanium 75A
  89. AM350 (passive)
  90. Silver
  91. Gold
  92. Graphite

End - Noble (Less Active, Cathodic)