Corrosionsource is designed to be the easiest way to quickly find pertinent corrosion information, products, data and services. Over the next few weeks and months, Corrosionsource premium content members will have on-line access to a variety of information and data, such as new test data, new technical reports, insightful investigations of failure and corrosion processes, solutions to critical corrosion and materials questions and much more.
Significant content and services, scheduled to be added to corrosionsource over the next few weeks and months, include:
- New Technical Reports
Significant new data and insightful reports from laboratory testing related to the following topics:
Sodium Bromide Brine Corrosion Testing
The general, crevice and pitting corrosion, stress corrosion cracking and galvanic corrosion behavior were studied on seven CRAs (HC, HG, IG3, I625, I725, I825 and 925) and one low alloy steel (T-95), by autoclave exposure tests. The exposures were carried out in non-inhibited and inhibited NaBr packer fluid environments with 100 psia H2S and 700 psia CO2 at 450 F for thirty and ninety days.
Hydrogen Charging In Hf Alkylation
Measurement of corrosion rates and steady state hydrogen permeation currents in environments containing hydrofluoric acid (hydrogen fluoride, HF) doped with arsenic (As) by electrochemical techniques.
Hydrogen Permeation Tests At High Pressure/temperature
High pressure/high temperature hydrogen tests in simulated sour environments. The tests were performed on two types of steel flange materials and one pipe material. One steel flange was tested for hydrogen damage in sulfinol with acid gas up to 240 F (116 C) while the other was tested in hydrocarbon/condensate up to 340 F (171 C). The pipe steel was tested in sour brine up to 176 F (80 C).
Testing, Evaluation and Selection Of CRAs
Evaluations of corrosion, pitting, sulfide stress cracking (SSC) and stress corrosion cracking (SCC) on 13Cr, Super 13Cr and 15Cr alloys in simulated oilfield environments. The experimental techniques employed were electrochemical critical pitting temperature (CPT) tests for CPT measurements, autoclave exposure (ACE) tests for corrosion, pitting, SSC and SCC evaluations and slow strain rate (SSR) tests for SSC and SCC evaluations.
- Download Center
New software demos, corrosion photo gallery, screen savers, all in our download center.
- News Archives
Extensive online archives of news from the world of corrosion.
- New Corrosion Performance Database
New database detailing corrosion data on a number of commonly used materials such as carbon steel, 13% Cr steel, duplex SS, Alloy 28, Nickel alloys, Titanium alloys etc.
- Online Training Packages
Comprehensive online training packages on the following topics, training that will help you master fundamentals and develop expertise, easily, quickly, online…
Electrochemistry
Corrosivity Prediction and Assessment
Cathodic Protection
Material selection
- Online Quiz
This is a new feature on corrosionsource, designed to test your knowledge/expertise in key areas related to materials and corrosion. This section will feature monthly quizzes, and will allow you to rate yourself with respect to your peers.
For the format, check out the pop quiz on periodic table.
- Virtual Classroom Lessons :
- Quality Control and Failure Analysis
- Prediction of Corrosivity of Multiphase CO2/H2S Systems
Get a complete list of virtual classrooms available on Premium level here.
|
|
|
Stainless Steel World